You what's going on guys black Scouts revival today I'm going to be showing you or talking about how to make a electric pit gun from a wall marked electric toothbrush these are like three bucks at Walmart anyhow what we're going to do for this technique is I've already got this one to go I'm just going to.

Talk you through it but basically this is the inner portion of the toothbrush and all we need to do is solve about an inch up the shaft of the toothbrush so solve that off then you're going to pull this piece out at that point you're going to open cavity and you'll just take a lock pick a standard lock pick and cut it off kind of like I did here.

For this one break it off here and just take the pick piece and all I do is I wrap some electrical tape around it and put Gorilla Glue and shove it down inside now let it dry it's going to vibrate that tooth vibrate the pick whenever I turn it on so what this does is it's kind of like a a bump key or electro pinball extra pick guns it's.

Going to vibrate those pins into place and jolt them into place and essentially you'll do the same thing as you would with a standard you know pick or pick gun put your tension wrench in turn this on and just kind of let it vibrate those into place just that easy so really very little movement all I'm basically doing.

Is going in and out and and giving it that letting it vibrate let the vibrations do the work you can also use a I've seen use a stick piece of metal to make these as well so just that simple basically just in and out and drive them those pins into place and so that's the $3.00 tool you know the pics I just pulled on my feet.

Steps quick and simple and and very effective so anyhow guys hope you enjoyed this video make sure scrubs our channel cuz we've got peanut videos every week and as always thanks for watching