Traditional Technology: Wooden Ash Cement
Description
Transcription
Infomation
Description
Primitive Technology: Wood Ash Cement - Creating wood ash cement from scratch
Subscribe: http://bit.ly/subPT | Never miss a video! Enable ‘ALL’ Notifications!
More videos, watch me cultivate and cook yams from scratch: http://bit.ly/2L5HmqY
Follow Primitive Technology:
Wordpress: https://primitivetechnology.wordpress.com/
Patreon: https://patreon.com/user?u=2945881
/>
Watch More Primitive Technology:
Latest Uploads: https://youtube.com/playlist?list=PLGnWLXjIDnpBR4xqf3FO-xFFwE-ucq4Fj
/> Pyrotechnology: https://youtube.com/playlist?list=PLGnWLXjIDnpBVRqu5lz5JGaQxjPs7q3CJ
/> Shelter: https://youtube.com/playlist?list=PLGnWLXjIDnpBBsdKZb-vy30o88SIxItp2
/> Weapons: https://youtube.com/playlist?list=PLGnWLXjIDnpA-XGDrrmVgBnSXx15i2Awp
/> Popular Videos: https://youtube.com/playlist?list=PLGnWLXjIDnpAb29Lrdki5BPjTpMon8zla
/>
Partial credit for this idea goes to James Keane who I discussed this with on my wordpress site (see conversation): https://primitivetechnology.wordpress.com/2018/03/06/lime/#comment-9736
I developed an experimental cement from made only from re-fired wood ash as its cementitious material. It was mixed with crushed terracotta as an aggregate and formed into a cube. The cement set hard after 3 days and did not dissolve in water after this period.
Process: First I burnt bark and leaves in a kiln at high temperatures to produce well burnt, mostly white wood ash. The ash was then mixed into water and stirred well. The excess water was poured off and the resulting paste was made into pellets and allowed to dry. A pellet was then re-heated in the forge until it glowed about orange hot. This was then taken out, cooled and dropped in a pot of water. The pellet dissolved and boiled due to a chemical reaction with the water. The paste was stirred and crushed terracotta (old tiles from previous projects) was added and mixed to form a mouldable mortar. This was formed into a cube and allowed to set for three days (in the video, a cube made exactly the same way 3 days previously was used due to time constraints). The resultant cube was strong and made a slight ringing sound when tapped with a finger nail. It was placed in water for 24 hours to simulate a very heavy rain event and did not dissolve or release residues into the water.
My current theory: The main component of wood ash consists of calcium in some form (e.g. calcium carbonate, calcium oxide). This can be up to 45% from my research. Calcium is in higher concentration in the bark and leaves of a tree. When the ash is mixed with water, the soluble component of wood ash (10% pot ash) dissolves into the water. But seeing that it does nothing for the cementing process, it is drained off leaving the insoluble calcium (and other components) in the paste. Doing this probably raises the relative percentage of calcium in the paste to about 50% or more. Most of the other 50 % consists of silica and alumina which are pozzolans, materials that chemically react with calcium hydroxide to increase the durability of the cement product. The paste was then made into a pellet and fired again to high temperature to convert all the calcium compounds to calcium oxide. It also reduces any charcoal in the pellet to ash if it hadn’t already been burnt the first time. This step seemed important as un-fired ash pellets only partially hardened and would fall apart in water, though retaining a weak undissolved 5mm thick crust. I can only surmise that re-firing the ash just gave a greater conversion of the calcium components to calcium oxide. The pellet is slaked in water converting the calcium oxide to calcium hydroxide. This cement was mixed with crushed terracotta which may also help in some way that I’m not aware of as I only did this one experiment and did not test other aggregates yet (e.g. sand, gravel etc.). Terracotta is porous and might hold together better than other materials. The mixture is allowed to set in air where carbon dioxide reacts with calcium hydroxide to form calcium carbonate cementing the aggregate together. After this, the cement will not dissolve in water.
Use: I think this material might have a potential use as a mortar holding rocks or bricks together in wet environments where limestone or snail shells are unavailable for making cement. Wood ash is a pretty ubiquitous material to most natural environments inhabited by people using biomass fuels. Wood ash cement turns a waste product into a valuable building material. From my research, wood ash is already being used as a partial replacement for cement in the building industry without decreases in strength of the final product. But I’ve only just started experimenting with it and don’t know its full capabilities and limitations. Calcium content of wood ash differs depending on the species of tree, the part of the tree burnt and the soil it’s grown on. Cautious experimentation is still required before committing to a hut built from this material.
Transcription
Eucalyptus tree (any tree will do) Fallen bark and leaves The kiln Hot coals Burning a lot of material for its ash Ash falls through grate Fine white ash with nearly no charcoal in it Adding ash to water Stir well.
Tip off excess water containing potash Retain the paste which contains the insoluble calcium hydroxide and calcium carbonate Compress into pellet Take it to the forge (a kiln would also do on a larger scale) Heat the pellet to an orange heat Extract the pellet and let it cool Slake pellet in water Stir Crush up old terracotta tiles (from previous project).
Add terracotta as aggregate (sand or gravel may also work though I've only tested this type) Form into shape Here's one I prepared 3 days earlier It has set hard Most importantly it will not dissolve in water Wood ash cement
Infomation
Author: Author Link: Youtube Link: https://www.youtube.com/watch?v=DP0t2MmOMEA Category: Channel Name: Primitive Technology Channel ID: 28 Tags: primitive,wood,ash,primitive,primitive technology,primitive tool,primitive tech,technology,wood ash cement,wood ash,wood cement,ash cement,ash,wood,cement,building with wood ash cement,using wood ash cement,creating wood ash cement,making wood ash cement,making ash cement,ash wood,ash wood cement,cement wood ash,cement from ash,cement from wood ash,cement from wood,making cement,making cement from wood ash,natural cement,cement from scratch,wood ash cement from scratch,
BUILDING A FORT IN THE WOODS-The Return! $250 Boot Giveaway! I BUILT a BARK ROOF for my FORT!
November 28, 2023
10 Comments
Watch →
Prime 5 Blackout EDC Tools 2021! Most efficient Day to day Elevate Objects!
November 28, 2023
8 Comments
Watch →
Top 10 Ultimate Automobile Catch House Catch & Automobile Survival Kit Essentials
November 27, 2023
8 Comments
Watch →
7 thoughts on “Traditional Technology: Wooden Ash Cement”
I reflect I have the chemistry upright. If any chemists are staring at correct me if I'm atrocious. The calcium compounds are transformed to calcium oxide in the 2d firing, turn to calcium hydroxide in the water and then assign to calcium carbonate in the air. There maybe a pozzolanic construct due to alumina and silica in the ash too. The highest product is a dice made perfect from wooden ash (fired twice) and crushed pottery. It devices laborious after 3 days and may maybe well no longer dissolve in water even when completely submerged for twenty-four hours. Thanks.
I wonder who edit the video
So clay an wooden ash?
Is the pottery we build with a aggregate of ash or calcium oxide that you made healthy to cook dinner in? Thanks I'm a fan of your channel
2:21 isn't hot is it? True puzzled how he defend that stuff?
I like your channel I love survival movies. At my dwelling we consistently play survival
What is the appropriate composition between burnt ash and sand?